7th Semester

10144EC701 WIRELESS COMMUNICATION  L T P C

3 0 0 3

UNIT I SERVICES AND TECHNICAL CHALLENGES 9

Types of Services, Requirements for the services, Multipath propagation, Spectrum

Limitations, Noise and Interference limited systems, Principles of Cellular networks,

Multiple Access Schemes.

UNIT II WIRELESS PROPAGATION CHANNELS 9

Propagation Mechanisms (Qualitative treatment), Propagation effects with mobile radio,

Channel Classification, Link calculations, Narrowband and Wideband models.

UNIT III WIRELESS TRANSCEIVERS 9

Structure of a wireless communication link, Modulation and demodulation – Quadrature

Phase Shift Keying, 􀀀/4-Differential Quadrature Phase Shift Keying, Offset-Quadrature

Phase Shift Keying, Binary Frequency Shift Keying, Minimum Shift Keying, Gaussian

Minimum Shift Keying, Power spectrum and Error performance in fading channels.

UNIT IV SIGNAL PROCESSING IN WIRELESS SYSTEMS 9

Principle of Diversity, Macrodiversity, Microdiversity, Signal Combining Techniques,

Transmit diversity, Equalisers- Linear and Decision Feedback equalisers, Review of

Channel coding and Speech coding techniques.

UNIT V ADVANCED TRANSCEIVER SCHEMES 9

Spread Spectrum Systems- Cellular Code Division Multiple Access Systems- Principle,

Power control, Effects of multipath propagation on Code Division Multiple Access,

Orthogonal Frequency Division Multiplexing – Principle, Cyclic Prefix, Transceiver

implementation, Second Generation(GSM, IS–95) and Third Generation Wireless

Networks and Standards

TOTAL= 45 PERIODS

TEXT BOOKS:

1. Andreas.F. Molisch, “Wireless Communications”, John Wiley – India, 2006.

2. Simon Haykin & Michael Moher, “Modern Wireless Communications”, Pearson

Education, 2007.

REFERENCES:

1. Rappaport. T.S., “Wireless communications”, Pearson Education, 2003.

2. Gordon L. Stuber, “Principles of Mobile Communication”, Springer International Ltd.,

2001.

3. Andrea Goldsmith, Wireless Communications, Cambridge University Press, 2007.

10144EC702 OPTICAL COMMUNICATION AND NETWORKING L T P C

3 0 0 3

UNIT I INTRODUCTION 9

Introduction, Ray theory transmission- Total internal reflection-Acceptance angle –

Numerical aperture – Skew rays – Electromagnetic mode theory of optical propagation –

EM waves – modes in Planar guide – phase and group velocity – cylindrical fibers –

SM fibers.

UNIT II TRANSMISSION CHARACTERISTICS OF OPTICAL FIBERS 9

Attenuation – Material absorption losses in silica glass fibers – Linear and Non linear

Scattering losses - Fiber Bend losses – Midband and farband infra red transmission –

Intra and inter Modal Dispersion – Over all Fiber Dispersion – Polarization- non linear

Phenomena. Optical fiber connectors, Fiber alignment and Joint Losses – Fiber Splices

– Fiber connectors – Expanded Beam Connectors – Fiber Couplers.

UNIT III SOURCES AND DETECTORS 9

Optical sources: Light Emitting Diodes - LED structures - surface and edge emitters,

mono and hetero structures - internal - quantum efficiency, injection laser diode

structures - comparison of LED and ILD

Optical Detectors: PIN Photo detectors, Avalanche photo diodes, construction,

characteristics and properties, Comparison of performance, Photo detector noise -Noise

sources , Signal to Noise ratio , Detector response time.

UNIT IV FIBER OPTIC RECEIVER AND MEASUREMENTS 9

Fundamental receiver operation, Pre amplifiers, Error sources – Receiver Configuration

– Probability of Error – Quantum limit.

Fiber Attenuation measurements- Dispersion measurements – Fiber Refractive index

profile measurements – Fiber cut- off Wave length Measurements – Fiber Numerical

Aperture Measurements – Fiber diameter measurements.

UNIT V OPTICAL NETWORKS 9

Basic Networks – SONET / SDH – Broadcast – and –select WDM Networks –

Wavelength Routed Networks – Non linear effects on Network performance –

Performance of WDM + EDFA system – Solitons – Optical CDMA – Ultra High Capacity

Networks.

TOTAL= 45 PERIODS

TEXT BOOKS:

1. Optical Fiber Communication – John M. Senior – Pearson Education – Second

Edition. 2007

2. Optical Fiber Communication – Gerd Keiser – Mc Graw Hill – Third Edition. 2000

REFERENCES:

1.J.Gower, “Optical Communication System”, Prentice Hall of India, 2001

2. Rajiv Ramaswami, “Optical Networks “ , Second Edition, Elsevier , 2004.

3. Govind P. Agrawal, “ Fiber-optic communication systems”, third edition, John Wiley &

sons, 2004.

4. R.P. Khare, “Fiber Optics and Optoelectronics”, Oxford University Press, 2007.

10144EC703 RF AND MICROWAVE ENGINEERING L T P C

3 0 0 3

UNIT I TWO PORT RF NETWORKS-CIRCUIT REPRESENTATION 9

Low frequency parameters-impedance ,admittance, hybrid and ABCD. High frequency

parameters-Formulation of S parameters, properties of S parameters-Reciprocal and

lossless networks, transmission matrix, Introduction to component basics, wire, resistor,

capacitor and inductor, applications of RF

UNIT II RF TRANSISTOR AMPLIFIER DESIGN AND MATCHING

NETWORKS 9

Amplifier power relation, stability considerations, gain considerations noise figure,

impedance matching networks, frequency response, T and Π matching networks,

microstripline matching networks

UNIT III MICROWAVE PASSIVE COMPONENTS 9

Microwave frequency range, significance of microwave frequency range - applications of

microwaves. Scattering matrix -Concept of N port scattering matrix representation-

Properties of S matrix- S matrix formulation of two-port junction. Microwave junctions -

Tee junctions -Magic Tee - Rat race - Corners - bends and twists - Directional couplers -

two hole directional couplers- Ferrites - important microwave properties and applications

– Termination - Gyrator- Isolator-Circulator - Attenuator - Phase changer – S Matrix for

microwave components – Cylindrical cavity resonators.

UNIT IV MICROWAVE SEMICONDUCTOR DEVICES 9

Microwave semiconductor devices- operation - characteristics and application of BJTs

and FETs -Principles of tunnel diodes - Varactor and Step recovery diodes - Transferred

Electron Devices -Gunn diode- Avalanche Transit time devices- IMPATT and TRAPATT

devices. Parametric devices -Principles of operation - applications of parametric

amplifier .Microwave monolithic integrated circuit (MMIC) - Materials and fabrication

techniques

UNIT V MICROWAVE TUBES AND MEASUREMENTS 9

Microwave tubes- High frequency limitations - Principle of operation of Multicavity

Klystron, Reflex Klystron, Traveling Wave Tube, Magnetron. Microwave measurements:

Measurement of power, wavelength, impedance, SWR, attenuation, Q and Phase shift.

TOTAL= 45 PERIODS

TEXT BOOK:

1) Samuel Y Liao, “Microwave Devices & Circuits” , Prentice Hall of India, 2006.

2) Reinhold.Ludwig and Pavel Bretshko ‘RF Circuit Design”, Pearson Education, Inc.,

2006

REFERENCES:

1. Robert. E.Collin-Foundation of Microwave Engg –Mc Graw Hill.

2. Annapurna Das and Sisir K Das, “Microwave Engineering”, Tata Mc Graw

3. Hill Inc., 2004.

4. M.M.Radmanesh , RF & Microwave Electronics Illustrated, Pearson

Education, 2007.

5. Robert E.Colin, 2ed “Foundations for Microwave Engineering”, McGraw Hill, 2001

6. D.M.Pozar, “Microwave Engineering.”, John Wiley & sons, Inc., 2006.

10144EC704 VLSI DESIGN L T P C

3 0 0 3

UNIT I CMOS TECHNOLOGY 9

A brief History-MOS transistor, Ideal I-V characteristics, C-V characteristics, Non ideal I- V

effects, DC transfer characteristics - CMOS technologies, Layout design Rules, CMOS process

enhancements, Technology related CAD issues, Manufacturing issues

UNIT II CIRCUIT CHARACTERIZATION AND SIMULATION 9

Delay estimation, Logical effort and Transistor sizing, Power dissipation, Interconnect,

Design margin, Reliability, Scaling- SPICE tutorial,

Device models, Device characterization, Circuit characterization, Interconnect simulation

UNIT III COMBINATIONAL AND SEQUENTIAL CIRCUIT DESIGN 9

Circuit families –Low power logic design – comparison of circuit families – Sequencing static

circuits, circuit design of latches and flip flops, Static sequencing element

methodology- sequencing dynamic circuits – synchronizers

UNIT IV CMOS TESTING 9

Need for testing- Testers, Text fixtures and test programs- Logic verification- Silicon debug

principles- Manufacturing test – Design for testability – Boundary scan

UNIT V SPECIFICATION USING VERILOG HDL 9

Basic concepts- identifiers- gate primitives, gate delays, operators, timing controls,

procedural assignments conditional statements, Data flow and RTL, structural gate level switch

level modeling, Design hierarchies, Behavioral and RTL modeling, Test benches, Structural

gate level description of decoder, equality detector, comparator, priority encoder, half

adder, full adder, Ripple carry adder, D latch and D flip flop.

TOTAL= 45 PERIODS

TEXTBOOKS:

1. Weste and Harris: “CMOS VLSI DESIGN “(Third edition) Pearson Education, 2005

2. D.A Pucknell & K.Eshraghian , “ Basic VLSI Design “, Third edition, PHI, 2003

REFERENCES:

1. Wayne Wolf, “ Modern VLSI design” , Pearson Education, 2003

2. M.J.S.Smith:” Application specific integrated circuits”, Pearson Education, 1997

3. Ciletti , “ Advanced Digital Design with the Verilog HDL “, Prentice Hall of India, 2003

4. J.Bhasker: “Verilog HDL primer “, BS publication,2001(unit-V)

SEMESTER VII – Elective II (E02)

Code No. Course Title L T P C

10144ECE21 Advanced Digital Signal Processing 3 0 0 3

10144GE004 Total Quality Management 3 0 0 3

10144ECE23 Cryptography and Network Security 3 0 0 3

10144ECE24 Information Theory 3 0 0 3

10144GE010 Intellectual Property Rights 3 0 0 3

10144ECE26 Robotics 3 0 0 3

10144ECE27 Radar and Navigational Aids 3 0 0 3

SEMESTER VII – Elective III (E03)

Code No. Course Title L T P C

10144ECE31 Advanced Microprocessors 3 0 0 3

10144ECE32 Dot Net and Java Programming 3 0 0 3

10144ECE33 High Speed Networks 3 0 0 3

10144ECE34 Soft Computing 3 0 0 3

10144ECE35 Multimedia Compression & Communication 3 1 0 4

10144ECE36 Parallel and Distributed Processing 3 0 0 3

10144ECE37 Advanced Digital System Design 3 0 0 3

10144ECE38 Optoelectronic Devices 3 0 0 3

10144EC705 VLSI LAB L T P C

0 0 3 2

1. Study of Simulation using tools.

2. Study of Synthesis tools.

3. Place and Root and Back annotation for FPGAs.

4. Study of development tool for FPGAs for schematic entry and verilog.

5. Design of traffic light controller using verilog and above tools.

6. Design and simulation of pipelined serial and parallel adder to add/subtract 8 number

of size, 12 bits each in 2’s complement.

7. Design and simulation of back annotated verilog files for multiplying two signed, 8 bit

numbers in 2’s complement. Design must be pipelined and completely RTL complaint.

8. Study of FPGA board (http://www.xess.com) and testing on board LEDs and switches

using verilog codes.

9. Testing the traffic controller design developed in SI.NO.5 on the FPGA board.

Design a realtime clock (2 digits, 7 segments LED displays each for HRS.,MTS, and

SECS.) and demonstrate its working on the FPGA board. An expansion card is required

for the displays.

TOTAL= 45 PERIODS

10144EC706 OPTICAL & MICROWAVE LAB L T P C

0 0 3 2

Microwave Experiments:

1. Reflex Klystron – Mode characteristics

2. Gunn Diode – Characteristics

3. VSWR, Frequency and Wave Length Measurement

4. Directional Coupler – Directivity and Coupling Coefficient – S – parameter

measurement

5. Isolator and Circulator – S - parameter measurement

6. Attenuation and Power measurement

7. S - matrix Characterization of E-Plane T, H-Plane T and Magic T.

8. Radiation Pattern of Antennas.

9. Antenna Gain Measurement

Optical Experiments:

1. DC characteristics of LED and PIN Photo Diode.

2. Mode Characteristics of Fibers

3. Measurement of Connector and Bending Losses.

4. Fiber Optic Analog and Digital Link

5. Numerical Aperture Determination for Fibers

6. Attenuation Measurement in Fibers

TOTAL= 45 PERIODS

Microwave Experiments:

LIST OF EQUIPMENTS:

1) Klystron Power Supply – 6

2) Reflex Klystron Oscillator – 6 (X band)

3) Gunn Power Supply – 3

4) Gunn Oscillator – 3 (X band)

5) Isolator – 9

6) Variable attenuator – 9 (0.6 dB)

7) PIN modulator – 3

8) Slotted waveguide Section with Probe and Carriage – 2

9) Frequency meter (direct reading type) – 4

10) Directional coupler 3dB, 10dB – 1 each

11) Circulator – 1

12) E Plane T, H Plane T, Magic T – 2 each

13) Horn antenna – 2 (X band) compatible

14) Turn table for antenna measurement – 1

15) Waveguide stands – 30

16) Detectors – 10

17) Network analyzer (Scalar or Vector) – 1

18) Power meter

19) BNC to BNC and BNC to TNC Cables – Required numbers

20) Bolts, nuts and Screws and Screw driver – Required numbers

Optical Experiments:

LIST OF EQUIPMENTS:

1) 850 nm LED Module – 3 Nos

2) 850 nm PIN Photo Diode Module – 2 Nos

3) Glass / Plastic Fiber Patch Cords – 1 meter length

4) Optical Power meter – 2 Nos

5) Stabilized Current Source (0-100 mA) – 3 Nos

6) Variable Supply (0-30v) – 2 Nos

7) Digital Multimeter – 2 Nos

8) Fiber Spools of Varied length with Connectors

9) Numerical Aperture measurement kit – 1No

10) Fiber Optic Analog Tranceiver kit/Module – 1 No

11) Fiber Optic Digital Tranceiver kit/Module – 1 No

12) CRO (0-100MHZ) – 2 Nos

13) Signal Generator – 1 No

14) Pulse Generator – 1 No

SEMESTER VII – Elective II (E02)

10144ECE21 ADVANCED DIGITAL SIGNAL PROCESSING L T P C

3 0 0 3      

UNIT I PARAMETRIC METHODS FOR POWER SPECTRUM ESTIMATION

9

Relationship between the auto correlation and the model parameters – The Yule – Walker

method for the AR Model Parameters – The Burg Method for the AR Model parameters –

unconstrained least-squares method for the AR Model parameters – sequential estimation

methods for the AR Model parameters – selection of AR Model order.

UNIT II ADAPTIVE SIGNAL PROCESSING 9

FIR adaptive filters – steepest descent adaptive filter – LMS algorithm – convergence of LMS

algorithms – Application: noise cancellation – channel equalization – adaptive recursive filters

– recursive least squares.

UNIT III MULTIRATE SIGNAL PROCESSING 9

Decimation by a factor D – Interpolation by a factor I – Filter Design and implementation for

sampling rate conversion: Direct form FIR filter structures – Polyphase filter structure.

UNIT IV SPEECH SIGNAL PROCESSING 9

Digital models for speech signal : Mechanism of speech production – model for vocal tract,

radiation and excitation – complete model – time domain processing of speech signal:- Pitch

period estimation – using autocorrelation function – Linear predictive Coding: Basic

Principles – autocorrelation method – Durbin recursive solution.

UNIT V WAVELET TRANSFORMS 9

Fourier Transform : Its power and Limitations – Short Time Fourier Transform – The Gabor

Transform - Discrete Time Fourier Transform and filter banks – Continuous Wavelet

Transform – Wavelet Transform Ideal Case – Perfect Reconstruction Filter Banks and

wavelets – Recursive multi-resolution decomposition – Haar Wavelet – Daubechies Wavelet.

TOTAL : 45 PERIODS

TEXTBOOKS

1. John G.Proakis, Dimitris G.Manobakis, Digital Signal Processing, Principles,

Algorithms and Applications, Third edition, (2000) PHI.

2. Monson H.Hayes – Statistical Digital Signal Processing and Modeling, Wiley, 2002.

REFERENCES

1. L.R.Rabiner and R.W.Schaber, Digital Processing of Speech Signals, Pearson

Education (1979).

2. Roberto Crist, Modern Digital Signal Processing, Thomson Brooks/Cole (2004)

3. Raghuveer. M. Rao, Ajit S.Bopardikar, Wavelet Transforms, Introduction to Theory

and applications, Pearson Education, Asia, 2000.

10144GE004 TOTAL QUALITY MANAGEMENT L T P C

3 0 0 3

UNIT I INTRODUCTION 9

Introduction - Need for quality - Evolution of quality - Definition of quality - Dimensions of

manufacturing and service quality - Basic concepts of TQM - Definition of TQM – TQM

Framework - Contributions of Deming, Juran and Crosby – Barriers to TQM.

UNIT II TQM PRINCIPLES 9

Leadership – Strategic quality planning, Quality statements - Customer focus –

Customer orientation, Customer satisfaction, Customer complaints, Customer retention -

Employee involvement – Motivation, Empowerment, Team and Teamwork, Recognition

and Reward, Performance appraisal - Continuous process improvement – PDSA cycle,

5s, Kaizen - Supplier partnership – Partnering, Supplier selection, Supplier Rating.

UNIT III TQM TOOLS & TECHNIQUES I 9

The seven traditional tools of quality – New management tools – Six-sigma: Concepts,

methodology, applications to manufacturing, service sector including IT – Bench marking

– Reason to bench mark, Bench marking process – FMEA – Stages, Types.

UNIT IV TQM TOOLS & TECHNIQUES II 9

Quality circles – Quality Function Deployment (QFD) – Taguchi quality loss function –

TPM – Concepts, improvement needs – Cost of Quality – Performance measures.

UNIT V QUALITY SYSTEMS 9

Need for ISO 9000- ISO 9000-2000 Quality System – Elements, Documentation, Quality

auditing- QS 9000 – ISO 14000 – Concepts, Requirements and Benefits – Case studies

of TQM implementation in manufacturing and service sectors including IT.

TOTAL= 45 PERIODS

TEXT BOOK

1. Dale H.Besterfiled, et at., “Total Quality Management”, Pearson Education Asia, 3rd

Edition, Indian Reprint (2006).

REFERENCES

1. James R. Evans and William M. Lindsay, “The Management and Control of Quality”,

6th Edition, South-Western (Thomson Learning), 2005.

2. Oakland, J.S., “TQM – Text with Cases”, Butterworth – Heinemann Ltd., Oxford, 3rd

Edition, 2003.

3. Suganthi,L and Anand Samuel, “Total Quality Management”, Prentice Hall (India)

Pvt. Ltd.,2006.

4. Janakiraman, B and Gopal, R.K, “Total Quality Management – Text and Cases”,

Prentice Hall (India) Pvt. Ltd., 2006.

10144ECE23 CRYPTOGRAPHY AND NETWORK SECURITY L T P C

3 0 0 3

UNIT I INTRODUCTION 10

OSI Security Architecture - Classical Encryption techniques – Cipher Principles – Data

Encryption Standard – Block Cipher Design Principles and Modes of Operation -

Evaluation criteria for AES – AES Cipher – Triple DES – Placement of Encryption

Function – Traffic Confidentiality

UNIT II PUBLIC KEY CRYPTOGRAPHY 10

Key Management - Diffie-Hellman key Exchange – Elliptic Curve Architecture and

Cryptography - Introduction to Number Theory – Confidentiality using Symmetric

Encryption – Public Key Cryptography and RSA.

UNIT III AUTHENTICATION AND HASH FUNCTION 9

Authentication requirements – Authentication functions – Message Authentication Codes

– Hash Functions – Security of Hash Functions and MACs – MD5 message Digest

algorithm - Secure Hash Algorithm – RIPEMD – HMAC Digital Signatures –

Authentication Protocols – Digital Signature Standard

UNIT IV NETWORK SECURITY 8

Authentication Applications: Kerberos – X.509 Authentication Service – Electronic Mail

Security – PGP – S/MIME - IP Security – Web Security.

UNIT V SYSTEM LEVEL SECURITY 8

Intrusion detection – password management – Viruses and related Threats – Virus

Counter measures – Firewall Design Principles – Trusted Systems.

TOTAL= 45 PERIODS

TEXT BOOKS

1. William Stallings, “Cryptography And Network Security – Principles and Practices”,

Pearson Education, Third Edition, 2003.

2. Behrouz A. Foruzan, “Cryptography and Network Security”, Tata McGraw-Hill, 2007

REFERENCES

1. Pachghare, “Cryptography and Information Security” , PHI, 2009.

2. Charles B. Pfleeger, Shari Lawrence Pfleeger, “Security in Computing”, Third Edition,

Pearson Education, 2003

3. Wade Trappe and Lawrence C. Washington , “ Introduction to Cryptography with

coding theory” , Pearson Education, 2007.

4. Thomas Calabrese, “Information Security Intelligence : Cryptographic Principles and

Applications”, Thomson Delmar Learning,2006.

5. Atul Kahate, “Cryptography and Network Security”, Tata McGraw-Hill, 2003.

10144ECE24 INFORMATION THEORY L T P C

3 0 0 3

UNIT I QUANTITATIVE STUDY OF INFORMATION 8

Basic inequalities, Entropy, Kullback-Leibler distance, Mutual information, Bounds on

entropy, Fisher information , Cramer Rao inequality, Second law of thermodynamics ,

Sufficient statistic , Entropy rates of a Stochastic process

UNIT II CAPACITY OF NOISELESS CHANNEL 8

Fundamental theorem for a noiseless channel ,Data compression , Kraft inequality ,

Shannon-Fano codes , Huffman codes , Asymptotic equipartition , Rate distortion theory

.

UNIT III CHANNEL CAPACITY 9

Properties of channel capacity , Jointly typical sequences , Channel Coding Theorem,

converse to channel coding theorem, Joint source channel coding theorem ,

UNIT IV DIFFERENTIAL ENTROPY AND GAUSSIAN CHANNEL 9

AEP for continuous random variables, relationship between continuous and discrete

entropy, properties of differential entropy, Gaussian channel definitions, converse to

coding theorem for Gaussian channel, channels with colored noise, Gaussian channels

with feedback .

UNIT V NETWORK INFORMATION THEORY 11

Gaussian multiple user channels , Multiple access channel , Encoding of correlated

sources , Broadcast channel , Relay channel , Source coding and rate distortion with

side information , General multi-terminal networks.

TOTAL= 45 PERIODS

TEXTBOOK

1. Elements of Information theory – Thomas Cover, Joy Thomas : Wiley 1999

REFERENCE

1. Information theory, inference & learning algorithms – David Mackay.

10144GE010 INTELLECTUAL PROPERTY RIGHTS L T P C

3 0 0 3

UNIT I 9

Introduction – Invention and Creativity – Intellectual Property (IP) – Importance –

Protection of IPR – Basic types of property (i). Movable Property - Immovable Property

and - Intellectual Property.

UNIT II 9

IP – Patents – Copyrights and related rights – Trade Marks and rights arising from

Trademark registration – Definitions – Industrial Designs and Integrated circuits –

Protection of Geographical Indications at national and International levels – Application

Procedures.

UNIT III 9

International convention relating to Intellectual Property – Establishment of WIPO –

Mission and Activities – History – General Agreement on Trade and Tariff (GATT) –

TRIPS Agreement.

UNIT IV 9

Indian Position Vs WTO and Strategies – Indian IPR legislations – commitments to

WTO-Patent Ordinance and the Bill – Draft of a national Intellectual Property Policy –

Present against unfair competition.

UNIT V 9

Case Studies on – Patents (Basumati rice, turmeric, Neem, etc.) – Copyright and related

rights – Trade Marks – Industrial design and Integrated circuits – Geographic indications

– Protection against unfair competition.

TOTAL = 45 PERIODS

TEXT BOOKS:

1. Subbaram N.R. “Handbook of Indian Patent Law and Practice “, S. Viswanathan

Printers and Publishers Pvt. Ltd., 1998.

REFERENCES:

1. Eli Whitney, United States Patent Number: 72X, Cotton Gin, March 14, 1794.

2. Intellectual Property Today: Volume 8, No. 5, May 2001, [www.iptoday.com].

3. Using the Internet for non-patent prior art searches, Derwent IP Matters, July 2000.

www.ipmatters.net/features/000707_gibbs.html.

10144ECE26 ROBOTICS

Unit – I - FUNDAMENTALS OF ROBOT 9

Robot – Definition – Robot Anatomy – Co – ordinate system, work envelope, type and

classification – specifications – pitch, Yaw, Roll, Joint Notations, Speed of Motion, Pay Load

– Robot Parts and Their functions – Need for Robots – Different Applications

Unit – II - ROBOT DRIVE SYSTEMS AND END EFFECTIORS

Pneumatic Drive – Hydraulic drives – Mechanical Drives – Electrical Drives – D.C. Servo

Motors Stepper Motor, A.C. Servo Motors – Salient Features, Applications and comparison of

all these Drives.End – Effectors – Grippers – Mechanical Grippers, Pneumatic and Hydraulic

Gripper, Magnetic Grippers, Vacuum Grippers, Two fingered and three fingered Grippers,

Internal Grippers, Internal Grippers and External Grippers. Selection and Design

Considerations.

UNIT – III SENSORS AND MACHINE VISION 9

Requirements of a sensor, principles and Applications of the following types of sensors –

position of sensors (Poezo Electric Sensor, LVDT, Resolves, Optical Encoders, Pneumatic

position Sensors). Range Sensors (Triangulation Principle, Structured, Lighting Approach,

Time of Flight Range Finders, Laser Range Meters), Proximity Sensors (Inductive, Hall

Effect, Capacitive, Ultrasonic and Optical Proximity Sensors), Touch Sensors, (Binary

Sensors, Analog Sensors), Wrist Sensors, Compliance Sensors, Slip Sensors.

Camera, Frame Grabber, Sensing and Digitizing Image Date – Signal Conversion, Image

Storage, Lighting Techniques, Image Processing and Analysis – Data Reduction,

Segmentation, Feature Extraction, Object Recognition, Other Algorithms, Applications –

Inspection, Identification, Visual Serving and Navigation.

UNIT - IV ROBOT KINEMATICS AND ROBOT PROGRAMMING 9

Forward kinematics, Inverse Kinematics and Difference – Forward kinematics and Reverse

Kinematics and Manipulators with Two, Three Degree of Freedom (In 2 Dimensional), Four

Degrees of Freedom (In 3 Dimensional) – DH matrices – Deviations and Problems.

Teach Pendant programming, Lead through Programming, Robot Programming Languages –

VAL Programming – Motion Commends, Sensor Command, End effector commands, and

Simple programs.

UNIT – V IMPLEMTATION AND ROBOT ECONOMICS 9

RGV, AGV, Implementation of Robots in Industries – Various Steps, Safety Considerations

for Robot Operations, Economic Analysis of Robots – Pay back Method, EUAC method, Rate

of Return Method,

Total : 45

TEXT BOOKS

1. M.P. Gwover “ Industrial Robotics - Technology, Programming and Application”,

MCgraw Hill 2001

2. FG K.S. Gonzalz RC and Lee CSG, “Robotics Control, Sensing, Vision and

Intelligence”, MC Graw – Hill Book 1987.

10144ECE27 RADAR AND NAVIGATIONAL AIDS L T P C

3 0 0 3

UNIT I 9

Introduction to Radar

Basic Radar –The simple form of the Radar Equation- Radar Block Diagram- Radar

Frequencies –Applications of Radar – The Origins of Radar

The Radar Equation

Introduction- Detection of Signals in Noise- Receiver Noise and the Signal-to-Noise

Ratio-Probability Density Functions- Probabilities of Detection and False Alarm-

Integration of Radar Pulses- Radar Cross Section of Targets- Radar cross Section

Fluctuations- Transmitter Power-Pulse Repetition Frequency- Antenna Parameters-

System losses – Other Radar Equation Considerations

UNIT II 9

MTI and Pulse Doppler Radar

Introduction to Doppler and MTI Radar- Delay –Line Cancelers- Staggered Pulse

Repetition Frequencies –Doppler Filter Banks - Digital MTI Processing - Moving Target

Detector - Limitations to MTI Performance - MTI from a Moving Platform (AMIT) - Pulse

Doppler Radar – Other Doppler Radar Topics- Tracking with Radar –Monopulse

Tracking –Conical Scan and Sequential Lobing - Limitations to Tracking Accuracy -

Low-Angle Tracking - Tracking in Range - Other Tracking Radar Topics -Comparison of

Trackers - Automatic Tracking with Surveillance Radars (ADT).

UNIT III 9

Detection of Signals in Noise –Introduction – Matched –Filter Receiver –Detection

Criteria – Detectors –-Automatic Detector - Integrators - Constant-False-Alarm Rate

Receivers - The Radar operator - Signal Management - Propagation Radar Waves -

Atmospheric Refraction -Standard propagation - Nonstandard Propagation - The Radar

Antenna - Reflector Antennas - Electronically Steered Phased Array Antennas - Phase

Shifters - Frequency-Scan Arrays

Radar Transmitters- Introduction –Linear Beam Power Tubes - Solid State RF Power

Sources - Magnetron - Crossed Field Amplifiers - Other RF Power Sources - Other

aspects of Radar Transmitter.

Radar Receivers - The Radar Receiver - Receiver noise Figure - Superheterodyne

Receiver - Duplexers and Receiver Protectors- Radar Displays.

UNIT IV 9

Introduction - Introduction - Four methods of Navigation .

Radio Direction Finding - The Loop Antenna - Loop Input Circuits - An Aural Null

Direction Finder - The Goniometer - Errors in Direction Finding - Adcock Direction

Finders - Direction Finding at Very High Frequencies - Automatic Direction Finders - The

Commutated Aerial Direction Finder - Range and Accuracy of Direction Finders

Radio Ranges - The LF/MF Four course Radio Range - VHF Omni Directional

Range(VOR) - VOR Receiving Equipment - Range and Accuracy of VOR - Recent

Developments.

Hyperbolic Systems of Navigation (Loran and Decca) - Loran-A - Loran-A Equipment

- Range and precision of Standard Loran - Loran-C - The Decca Navigation System -

Decca Receivers - Range and Accuracy of Decca - The Omega System

UNIT V 9

DME and TACAN - Distance Measuring Equipment - Operation of DME - TACAN -

TACAN Equipment

Aids to Approach and Landing - Instrument Landing System - Ground Controlled

Approach System - Microwave Landing System(MLS)

Doppler Navigation - The Doppler Effect - Beam Configurations -Doppler Frequency

Equations - Track Stabilization - Doppler Spectrum - Components of the Doppler

Navigation System - Doppler range Equation - Accuracy of Doppler Navigation Systems.

Inertial Navigation - Principles of Operation - Navigation Over the Earth - Components

of an Inertial Navigation System - Earth Coordinate Mechanization - Strapped-Down

Systems - Accuracy of Inertial Navigation Systems.

Satellite Navigation System - The Transit System - Navstar Global Positioning System

(GPS)

TOTAL= 45 PERIODS

TEXTBOOKS

1. Merrill I. Skolnik ," Introduction to Radar Systems", Tata McGraw-Hill (3rd Edition)

2003.

2. N.S.Nagaraja, Elements of Electronic Navigation Systems, 2nd Edition, TMH, 2000.

REFERENCES

1. Peyton Z. Peebles:, "Radar Principles", Johnwiley, 2004

2. J.C Toomay, " Principles of Radar", 2nd Edition –PHI, 2004

10144ECE31 ADVANCED MICROPROCESSORS L T P C

3 0 0 3

UNIT I 80186, 80286, 80386 AND 80486 MICROPROCESSORS 9

80186 Architecture, Enhancements of 80186 – 80286 Architecture – Real and Virtual

Addressing Modes – 80386 Architecture – Special Registers – Memory Management –

Memory Paging Mechanism – 80486 Architecture – Enhancements – Cache Memory

Techniques – Exception Handling – Comparison of Microprocessors (8086 – 80186 –

80286 – 80386 – 80486).

UNIT II PENTIUM MICROPROCESSORS 9

Pentium Microprocessor Architecture – Special Pentium Registers – Pentium Memory

Management – New Pentium Instructions – Pentium Pro Microprocessor Architecture –

Special features – Pentium II Microprocessor Architecture – Pentium III Microprocessor

Architecture – Pentium III Architecture – Pentium IV Architecture – Comparison of

Pentium Processors.

UNIT III RISC PROCESSORS I 9

PowerPC620 – Instruction fetching – Branch Prediction – Fetching – Speculation,

Instruction dispatching – dispatch stalls – Instruction Execution – Issue stalls- Execution

Parallelism – Instruction completion – Basics of P6 micro architecture – Pipelining – ouroforder

core pipeline – Memory subsystem.

UNIT IV RISC PROCESSORS II(Superscalar Processors) 9

Intel i960 – Intel IA32- MIPS R8000 – MIPS R10000 – Motorola 88110 – Ultra SPARC

processor- SPARC version 8 – SPARC version 9.

UNIT V PC HARDWARE OVERVIEW 9

Functional Units & Interconnection, New Generation Mother Boards 286 to Pentium 4

Bus Interface- ISA- EISA- VESA- PCI- PCIX. Peripheral Interfaces and Controller,

Memory and I/O Port Addresses.

TOTAL= 45 PERIODS

TEXTBOOKS:

1. B.B.Brey The Intel Microprocessor 8086/8088 /80186/80188, 80286, 80386,

80486 PENTIUM, PENTIUM Pro, PII, PIII & IV Archietecture, Programming &

Interfacing, Pearson Education , 2004.

1. John Paul Shen, Mikko H.Lipasti, “Modern Processor Design”, Tata Mcgraw Hill,

2006.

REFERENCES

1. Douglas V.Hall, “Microprocessors and Interfacing”, Tata McGraw Hill, II

Edition 2006

2. Mohamed Rafiquzzaman, “Microprocessors and Microcomputer Based

System Design”, II Edition, CRC Press, 2007.

10144ECE32 DOT NET and JAVA Programming L T P C

3 0 0 3

UNIT I 9

Introduction to JAVA – I/O streaming –files – classes and Inheritance – Interfaces –

Array & string – Packages – exception handling – thread – Applet – Event handling –

database programming using JDBC.

UNIT II 9

Looking up internet address – Socket Programming – Client/ Server programs – Email

client – SMTP – PoP3 programs – web page retrieval – Protocol handlers – content

handlers – Remote method invocation – JAVA IDL.

UNIT III 9

Java Script Introduction – control structures – functions – arrays – objects – servlets –

deployment of simple servlets – webserver ( JAVA webserver/ Tomcat/ weblogic) – HTTP

GET and Post requests – session tracking – cookies – JDBC – Simple web applications .

UNIT IV 9

Overview of .NET framework – Working with XML – Techniques for reading and

writing XML data – ADO.NET connected and Disconnected Models – simple and complex

data binding – Data grid view class.

UNIT V 9

Application domains – Remoting – leasing and sponsorship - .NET coding design

guidelines – Assemblies – security – Application development web services – building and

XML web services – web service client – WSDL and SOAP – web service with complex data

types – web service performance.

TOTAL= 45 PERIODS

Text Books:

1. Cays Horstman, “ Core Java”, Volume 1- fundamentals, Prentice Hall, 8th edition.

2. Stephen C. Perry, “Core C# and . NET”, Pearson education, 2006.

References:

1. Balagurusamy, “ Java Programming”, 3rd edition, 2004.

2. Deitel & Deitel, “ Internet and Web Programming”, 4th edition, Prentice Hall.

3. Thuan Thai and Hoany Q.Lam, “ .NET framework essentials”, 2nd edition, O’reilly, 2002

10144ECE33 HIGH SPEED NETWORKS LT P C

3 0 0 3

UNIT I HIGH SPEED NETWORKS 9

Frame Relay Networks – Asynchronous transfer mode – ATM Protocol Architecture,

ATM logical Connection, ATM Cell – ATM Service Categories – AAL, High Speed LANs:

Fast Ethernet, Gigabit Ethernet, Fiber Channel – Wireless LANs: applications,

requirements – Architecture of 802.11

UNIT II CONGESTION AND TRAFFIC MANAGEMENT 8

Queuing Analysis- Queuing Models – Single Server Queues – Effects of Congestion –

Congestion Control – Traffic Management – Congestion Control in Packet Switching

Networks – Frame Relay Congestion Control.

UNIT III TCP AND ATM CONGESTION CONTROL 11

TCP Flow control – TCP Congestion Control – Retransmission – Timer Management –

Exponential RTO backoff – KARN’s Algorithm – Window management – Performance of

TCP over ATM. Traffic and Congestion control in ATM – Requirements – Attributes –

Traffic Management Frame work, Traffic Control – ABR traffic Management – ABR rate

control, RM cell formats, ABR Capacity allocations – GFR traffic management.

UNIT IV INTEGRATED AND DIFFERENTIATED SERVICES 8

Integrated Services Architecture – Approach, Components, Services- Queuing

Discipline, FQ, PS, BRFQ, GPS, WFQ – Random Early Detection, Differentiated

Services

UNIT V PROTOCOLS FOR QOS SUPPORT 9

RSVP – Goals & Characteristics, Data Flow, RSVP operations, Protocol Mechanisms –

Multiprotocol Label Switching – Operations, Label Stacking, Protocol details – RTP –

Protocol Architecture, Data Transfer Protocol, RTCP.

TOTAL= 45 PERIODS

TEXT BOOK

1. William Stallings, “HIGH SPEED NETWORKS AND INTERNET”, Pearson

Education, Second Edition, 2002.

REFERENCES

1. Warland, Pravin Varaiya, “High performance communication networks”, Second

Edition , Jean Harcourt Asia Pvt. Ltd., , 2001.

2. Irvan Pepelnjk, Jim Guichard, Jeff Apcar, “MPLS and VPN architecture”,

Cisco Press, Volume 1 and 2, 2003.

3. Abhijit S. Pandya, Ercan Sea, “ATM Technology for Broad Band

Telecommunication Networks”, CRC Press, New York, 2004.

10144ECE34 SOFT COMPUTING L T P C

3 0 0 3

UNIT I FUZZY SET THEORY 10

Introduction to Neuro – Fuzzy and Soft Computing – Fuzzy Sets – Basic Definition and

Terminology – Set-theoretic Operations – Member Function Formulation and

Parameterization – Fuzzy Rules and Fuzzy Reasoning – Extension Principle and Fuzzy

Relations – Fuzzy If-Then Rules – Fuzzy Reasoning – Fuzzy Inference Systems –

Mamdani Fuzzy Models – Sugeno Fuzzy Models – Tsukamoto Fuzzy Models – Input

Space Partitioning and Fuzzy Modeling.

UNIT II OPTIMIZATION 8

Derivative-based Optimization – Descent Methods – The Method of Steepest Descent –

Classical Newton’s Method – Step Size Determination – Derivative-free Optimization –

Genetic Algorithms – Simulated Annealing – Random Search – Downhill Simplex

Search.

UNIT III ARTIFICIAL INTELLIGENCE 10

Introduction, Knowledge Representation – Reasoning, Issues and Acquisition:

Prepositional and Predicate Calculus Rule Based knowledge Representation Symbolic

Reasoning Under Uncertainity Basic knowledge Representation Issues Knowledge

acquisition – Heuristic Search: Techniques for Heuristic search Heuristic Classification -

State Space Search: Strategies Implementation of Graph Search Search based on

Recursion Patent-directed Search Production System and Learning.

UNIT IV NEURO FUZZY MODELING 9

Adaptive Neuro-Fuzzy Inference Systems – Architecture – Hybrid Learning Algorithm –

Learning Methods that Cross-fertilize ANFIS and RBFN – Coactive Neuro Fuzzy Modeling –

Framework Neuron Functions for Adaptive Networks – Neuro Fuzzy Spectrum.

UNIT V APPLICATIONS OF COMPUTATIONAL INTELLIGENCE 8

Printed Character Recognition – Inverse Kinematics Problems – Automobile Fuel

Efficiency Prediction – Soft Computing for Color Recipe Prediction.

TOTAL= 45 PERIODS

TEXT BOOKS:

1. J.S.R.Jang, C.T.Sun and E.Mizutani, “Neuro-Fuzzy and Soft Computing”, PHI, 2004,

Pearson Education 2004.

2. N.P.Padhy, “Artificial Intelligence and Intelligent Systems”, Oxford University Press, 2006.

REFERENCES:

1. Elaine Rich & Kevin Knight, Artificial Intelligence, Second Edition, Tata Mcgraw Hill

Publishing Comp., 2006, New Delhi.

2. Timothy J.Ross, “Fuzzy Logic with Engineering Applications”, McGraw-Hill, 1997.

3. Davis E.Goldberg, “Genetic Algorithms: Search, Optimization and Machine Learning”,

Addison Wesley, N.Y., 1989.

4. S. Rajasekaran and G.A.V.Pai, “Neural Networks, Fuzzy Logic and Genetic

Algorithms”, PHI, 2003.

5. R.Eberhart, P.Simpson and R.Dobbins, “Computational Intelligence - PC Tools”, AP

Professional, Boston, 1996.

6. Amit Konar, “Artificial Intelligence and Soft Computing Behaviour and Cognitive model

of the human brain”, CRC Press, 2008.

10144ECE35 MULTIMEDIA COMPRESSION AND COMMUNICATION L T P C

3 0 0 3

UNIT I MULTIMEDIA COMPONENTS 9

Introduction - Multimedia skills - Multimedia components and their chacracteristics -

Text, sound, images, graphics, animation, video, hardware.

UNIT II AUDIO AND VIDEO COMPRESSION 9

Audio compression–DPCM-Adaptive PCM –adaptive predictive coding-linear Predictive

coding-code excited LPC-perpetual coding Video compression –principles-H.261-H.263-

MPEG 1, 2, 4.

UNIT III TEXT AND IMAGE COMPRESSION 9

Compression principles-source encoders and destination encoders-lossless and lossy

compression-entropy encoding –source encoding -text compression –static Huffman

coding dynamic coding –arithmetic coding –Lempel ziv-welsh Compression-image

compression

UNIT IV VoIP TECHNOLOGY 9

Basics of IP transport, VoIP challenges, H.323/ SIP –Network Architecture, Protocols,

Call establishment and release, VoIP and SS7, Quality of Service- CODEC Methods-

VOIP applicability

UNIT V MULTIMEDIA NETWORKING 9

Multimedia networking -Applications-streamed stored and audio-making the best Effort

service-protocols for real time interactive Applications-distributing multimedia-beyond

best effort service-secluding and policing Mechanisms-integrated services-differentiated

Services-RSVP.

TOTAL= 45 PERIODS

TEXT BOOKS

1. Fred Halsall “Multimedia communication - applications, networks, protocols and

standards”, Pearson education, 2007.

2. Tay Vaughan, “Multideai: making it work”, 7/e, TMH 2007

3. Kurose and W.Ross” Computer Networking “a Top down approach, Pearson education

2007

REFERENCES

1. Marcus gonzalves “Voice over IP Networks”, Mcgaraw hill

2. KR. Rao,Z S Bojkovic, D A Milovanovic, “Multimedia Communication Systems:

Techniques, Standards, and Networks”, Pearson Education 2007

3. R. Steimnetz, K. Nahrstedt, “Multimedia Computing, Communications and

Applications”, Pearson Education

4. Ranjan Parekh, “Principles of Multimedia”, TMH 2006

10144ECE36 PARALLEL AND DISTRIBUTED PROCESSING L T P C

3 0 0 3

UNIT I INTRODUCTION TO PARALLEL PROCESSING AND PARALLEL

ARCHITECTURES 9

Need and definition of parallel processing, shared memory multiprocessing, Distributed

memory, using parallelism, tools and languages, Parallelism in sequential machines,

Multiprocessor architecture, Pipelining, Array processors.

UNIT II SHARED MEMORY PROGRAMMING AND THREAD BASED

IMPLEMENTATION 9

Shared Memory Programming and its general model, Process model under UNIX,

Thread management, Example with threads, Attributes of Threads, Mutual Exclusion

with threads and Thread implementation..

UNIT III DISTRIBUTED COMPUTING – MESSAGE PASSING AND RPC MODEL 9

Message-passing model, General model, programming model, PVM, Remote procedure

calls (RPC), Parameter passing, JAVA Remote Method Invocation, Distributed

computing environment(DCE), Developing Applications in DCE.

UNIT IV DEBUGGING PARALLEL PROGRAMS AND OTHER PARALLELISM

PARADIGMS 9

Debugging Techniques, Debugging Message passing parallel programs and shared

memory parallel programs, Dataflow computing, systolic architectures, functional and

logic paradigms, distributed shared memory.

UNIT V DISTRIBUTED DATABASES AND DISTRIBUTED OPERATING

SYSTEMS 9

Reasons for and objectives of distributed databases, issues and systems, distribution

options, concurrency control, DDBMS structure. Need for Distributed operating systems,

network operating systems, distributed OS, Goals of DOS and Design issues.

TOTAL= 45 PERIODS

TEXT BOOKS

1. M.Sasikumar, D.Shikhare and P. Ravi Prakash, “Introduction to Parallel processing”.

PHI 2006.

2. V. Rajaraman, C. Siva Ram Murthy, “Parallel computers: Architecture and

programming”, PHI 2006.

REFERENCES

1. Harry F. Jordan, Gita Alaghband, “Fundamentals of parallel processing”, PHI 2006.

2. Quinn, M.J., “Designing Efficient Algorithms for Parallel Computers”, McGraw

-Hill, 1995.

3. Culler, D.E., “Parallel Computer Architecture”, A Hardware – Software approach,

Harcourt Asia Pte. Ltd., 1999

10144ECE37 ADVANCED DIGITAL SYSTEM DESIGN

L T P C

3 0 0 3

UNIT I - SEQUENTIAL CIRCUIT DESIGN 9

Analysis of Clocked Synchronous Sequential Networks (CSSN) Modeling of CSSN – State

Stable Assignment and Reduction – Design of CSSN – Desigh of Iterative Circuits ASM

Chart – ASM Realization.

UNIT II – ASYNCHRONIOUS SEQUENTIAL CIRCUIT DESIGN 9

Analysis of Asynchronous Sequential Circuit (ASC) – Flow Table Reduction – Race in (ASC)

– State Assignment – Problem and the Transition Table – Design of ASC – Static and

Dynamic Hazards – Essential Hazards – Data Synchronizers – Designing vending Machine

Controller – Mixed operating Mode Asynchronous Circuits.

UNIT III FAULT DIAGNOSIS AND TESTABILITY ALGORITHMS 9

Fault Table Method – Path Sensitization Method – Boolean Difference Method – Kohavi

Algorithm – Tolerance Techniques – The Compact Algorithm – Practical PLA’s – Fault in PLA

– Test Generation – masking cycle – DFT Schemes – Built – in Self test.

UNIT IV SYNCHRONOUS DESIGN USING PROGRAMMABLE DEVICES 9

EPROM to Realize a Sequential Circuit – Programmable Logic Devices – Designing a

synchronous Sequential Circuit using a GAL – EPROM – Realization State Machine using

PLD – FPGA –FPGA 2000 - FPGA 3000 FPGA 4000 FPGA Arch, Program inter connect,

Logical Black, Program I/O elements, Memory elements

UNIT V - ANTIFUSE & SRAM PROGAMMING TECHNIQUE 9

VHDL Description of combinational circuits – Arrays - VHDL operators – Compilation and

Simulation of VHDL Code – Modeling using VHDL – Flip Flops – Registers Counters –

Sequential Machine – Combinational logic Circuits – VHDL Code for Serial Adder – Binary

Multiplier – Binary Divider – Complete Sequential Systems – Design of a Simple

Microprocessor.

TOTAL= 45 PERIODS

TEXT BOOKS

1. John M. Yarbrough, “Digital Logic applications and design”, Thomson learning 2001.

2. Charles H Poth. Jr “ Digital System Design using VHDL” Thomson learning

1998.

3.Application Specific Integrated Circuit by Michal John Sebastion smith

10144ECE38 OPTO ELECTRONIC DEVICES L T P C

3 0 0 3

UNIT I ELEMENTS OF LIGHT AND SOLID STATE PHYSICS 9

Wave nature of light, Polarization, Interference, Diffraction, Light Source, review of

Quantum Mechanical concept, Review of Solid State Physics, Review of Semiconductor

Physics and Semiconductor Junction Device.

UNIT II DISPLAY DEVICES AND LASERS 9

Introduction, Photo Luminescence, Cathode Luminescence, Electro Luminescence,

Injection Luminescence, Injection Luminescence, LED, Plasma Display, Liquid Crystal

Displays, Numeric Displays, Laser Emission, Absorption, Radiation, Population

Inversion, Optical Feedback, Threshold condition, Laser Modes, Classes of Lasers,

Mode Locking, laser applications.

UNIT III OPTICAL DETECTION DEVICES 9

Photo detector, Thermal detector, Photo Devices, Photo Conductors, Photo diodes,

Detector Performance.

UNIT IV OPTOELECTRONIC MODULATOR 9

Introduction, Analog and Digital Modulation, Electro-optic modulators, Magneto Optic

Devices, Acoustoptic devices, Optical, Switching and Logic Devices.

UNIT V OPTOELECTRONIC INTEGRATED CIRCUITS 9

Introduction, hybrid and Monolithic Integration, Application of Opto Electronic Integrated

Circuits, Integrated transmitters and Receivers, Guided wave devices.

TOTAL= 45 PERIODS

TEXTBOOKS

1. Pallab Bhattacharya “Semiconductor Opto Electronic Devices”, Prentice Hall of India

Pvt., Ltd., New Delhi, 2006.

2. Jasprit Singh, “Opto Electronics – As Introduction to materials and devices”,

McGraw-Hill International Edition, 1998

REFERENCES

1. S C Gupta, Opto Electronic Devices and Systems, Prentice Hal of India,2005.

2. J. Wilson and J.Haukes, “Opto Electronics – An Introduction”, Prentice Hall, 1995.